VISSONIC Conference Microphone CAT5 Digital Flush-mounting Discussion Chairman/Delegate Unit
Functions
Control & Indicators
Each unit with two-color LED indicator on microphone, red for speaking, green means need acceptance from chairman to speak
MIC ON/OFF buttons with indicating backlight
Chairman unit with priority button and consent button for the delegates
Technical Parameters
Button: Touchable interface, no physical buttons
Sound Pickup: heart type capacitance
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Equivalent noise: 20dBA (SPL)
Main material: Aluminum
The maximum sound pressure: 125dB (THD <3%)
Weight: 0.6kg (with microphone)
Dimension: 100W × 40H× 65H mm (without microphone)
Operating temperature: 0 ºC to + 55 ºC
Color: Black
Features
- Stylish, low profile design with touchable interface
- Standard CAT5e and RJ45 connectors are used in CLEACON series to provide more convenient on projects and maintenance.
- Pluggable microphone
- Priority button and approval button on chairman unit VIS-DCC-F
- 3.5 earphone jack
- Support 48 kHz audio sampling rate
- Excellent immunity to the RF interference from cell phone or similar devices.
- Plug and play
- The discussion unit VIS-DCC-F/ VIS-DCD-F can be used independently or connected to VIS-DVU-FS and VIS-SPK-F.
- Compliance with IEC 60914, GBT 15381-94
- The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
- One CAT5e cable to transmit 64 channel audio and other signals
- High fidelity sound by zero loss audio transmit technology, 48K audio sampling frequency, 20Hz~20KHz response frequency
- "Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
- This system is assigned to each unit independently ID to avoid duplicate ID conflict
- Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback Cancellation)/ANC(Active Noise Control )/Mix (Auto-Mix) technology
- Hot-swap for any system unit, and the controller has auto-recovery function
- Precise directional microphone head with anti-wind microphone foam cover, with two-color LED indicator
- Button for MIC ON/OFF, Priority & Apply Answer button for chairman unit
- Without using PC software, our conference controller still owns following settings:
- Limit on the number of speaking persons: By Setting the number of active units at the same time(Number is 1/2/4/6/ units)
- Discussion modes:
- Chairman unit has priority to close all other units or mute them temporarily
- Chairman unit can answer the application for speaking from delegate
- Support simultaneous language interpretation by connected to the channel selector
- Work with our HD camera and video matrix switcher, it applies camera auto tracking function
Each unit with two-color LED indicator on microphone, red for speaking, green means need acceptance from chairman to speak
MIC ON/OFF buttons with indicating backlight
Chairman unit with priority button and consent button for the delegates
Technical Parameters
Button: Touchable interface, no physical buttons
Sound Pickup: heart type capacitance
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Equivalent noise: 20dBA (SPL)
Main material: Aluminum
The maximum sound pressure: 125dB (THD <3%)
Weight: 0.6kg (with microphone)
Dimension: 100W × 40H× 65H mm (without microphone)
Operating temperature: 0 ºC to + 55 ºC
Color: Black
Application